sarsam

Eyelit has started the general availability of version 5.1 of its ‘Eyelit Manufacturing’ suite of MES (Manufacturing Execution System) software with key enhancements that enable engineers to quickly configure special instructions and processing that enforce special work requests (SWRs) for research and development projects.

Problem

Developing new products such as solar cells and solar modules have typically been produced on dedicated R&D lines, which can vary from real-world manufacturing lines and therefore create different results. Providing engineers with the ability to produce R&D-based products on actual manufacturing lines could reduce variance and speed product to market cycles.

Solution

The Eyelit 5.1 release was developed in close collaboration with customers to provide more informed decisions for manufacturing efficiency and quality, and further accelerate new product introductions (NPI). The new ‘Eyelit Special Processing’ module helps manufacturers to design experiments and test evolving processes and products. This enables engineers to quickly configure special instructions and processing that enforce special work requests (SWRs) for research and development projects. The new ‘Eyelit Advanced Dispatching’ module helps manufacturers to systematically determine relative processing priorities and tradeoffs, which will improve sequencing of work.

Applications

Manufacturing Execution System including R&D products.

Platform

The Eyelit Platform has a graphical ‘Scenario Builder’ for end-users to configure flexible conditional manufacturing, as well as business-process and quality-management workflows. In addition, new highlights of the ‘Eyelit SPC’ module include enhanced charting, filtering, calculations, metrics, and Nelson control rules.

Availability

January 2014 onwards.

More and more solar module manufacturers on OFweek !

http://en.ofweek.com/

Solar Charging Controllers (SML)

Product Specifications/Features:

Battery State-of-Charge display with 3 LEDs
Acoustic load disconnect pre-waing
PWM-regulation (series type) Boost
Equalize and Float charging, also for VRLA
Automatic 12/24 Volt detection
Integrated temperature compensation
Large terminals (up to 16mm2 wire size)
SOC and voltage controlled LVD
Fully electronically protected

The SML series is a sophisticated solar charge controller family for low cost applications. The electronic circuit is equipped with a microcontroller that provides high-efficiency charging technology together with a number of outstanding status display, waing and safety functions.

The temperature-compensated three-stage PWM charging method (boost-equalization- float) is now adjustable to sealed and vented lead-acid batteries. The new version also allows an either SOC or voltage controlled low voltage disconnect function.

The battery status is clearly indicated by three LEDs.
As the first controller on the market in this price range it comes with an acoustic low voltage load disconnect pre-waing feature.

• Packing: Standard Export Packing
• Shipping: by Sea/Air/Express
• Standard: Inteational Standard

More Solar products on OFweek !

http://en.ofweek.com/

Efficient and Frosted Solar Panels

Product Specifications/Features:

Model: DS9455
Material: solar cell of Sun power
Dimension: 94*55*2mm
Voltage: 5.5v
Current: 200ma
* It is sealed with PET lamination technology, which has top quality and elegant appearance.
Application: this new solar panel is widely applied in solar chargers because of its high conversion efficiency and ultra thinness.

* Once you own this kind of solar chargers, you can charge your mobile phone or other digital products on the go, which you can get rid of shortage of electricity in emergent situation. 
Advantages: what’s the real surprise is the high conversion efficiency and ultra thinness. 

* We used some special technology to make sure the tidy and beautiful appearance that is necessary to many high-end products.
Its durable characteristics and integrated arrangement of solar cells are popular by customers.
In production, symmetry and beautiful outlook are always what we pursue.

* We can produce solar panel according to your requirements. If any questions, just feel free to contact me.

* Our company specializes in solar modules, solar panels, solar light, epoxy encapsulation solar panels, lamination solar panel and ultrathin solar panels.

More Solar panels on OFweek !

http://en.ofweek.com/

Its Comparative Advantage

LED handheld spotlightemploys light-emitting diode as its light source. Traditional halogen spotlight is of low luminous efficiency, high power consumption, heat dissipation and short service time. In comparison, LED spotlights own an upper hand in terms of lighting principle, energy saving, and environment protection.

Let’s make a comparison of 10WLED Spotlightand 50w traditional spotlights. LED spotlight consumes just 2 kilowatt-hours of electricity. However, the traditional spotlight consumes 12 kilowatt-hours of electricity. Each kilowatt-hour is counted by 0.8 CNY. The electricity bill paid for LED spotlight is only 19.2 CNY, and only cost 1/7 of the traditional spotlight. When it comes to the rated life, LED spotlight does not need maintenance during five years, while the traditional product must be changed every year.

Unique Character for Harsh Environment

LED handheld spotlight can produce 1,586 lumens of intense light with only three watt LEDs. Its operate voltage ranges from around 9 volts to 50 volts. It is also characteristic of around 50,000 rated life and IP 68. Its extruded aluminum cover and polycarbonate lens prevent the intrusion of liquid and dust. High waterproof level makes it work well in 3 meters of water, which is an ideal tool for underwater operation and marine lighting. The magnetic LED spotlight led bulbs manufacturer can be fixed on the surface of any ferrous metal, which makes it vibration-resist and easy-operated.

Conclusion: just like other LED light product, LED handheld spotlight is of low consumption, long rated life and low maintenance fee and etc. Furthermore, it encounters all the harsh condition in commercial operation, outdoor activity and marine operation.

 Takahashi petrochemical lubricants the hydrogenation unit imports of high-pressure angle valve localization and technological progress, the domestic high-pressure Industrial Valve spool, the life of the stem close to the level of similar foreign products.

High-pressure Butterfly Valve lubricating oil hydrogenation unit decompression system equipment, because of the design, a key component of the high-pressure angle valve spool, the stem often damaged. To foreign manufacturers purchase equipment accessories process takes six months, and expensive. Therefore, Takahashi petrochemical equipment power at Transvision Instrument Division of the technical staff from the second half of 2011, to carry out oil hydrogenation pressure angle valve localization research.

Due to lack of imported high-pressure angle valve technical information, technical staff spend a lot of effort to analyze the actual operating conditions of 18 pressure Angle Valve and related technical parameters derived by mapping the buy several domestic producers of different spool stem trial.

After a period of trial and improvement, Butterfly Valve stem has a large number of installed on imports of high-pressure angle valve, to solve the emergency device production, and maintenance costs of less than 1/4 of the imported.

 Drills that day, the scene of dozens of chariots in the smoke roar Benz. Suddenly, the bridge task is running a heavy mechanized bridge car fire hit the "enemy". In accordance with the exercise provides the driver plug in the side of the blue flag in the left rear side of the vehicle body, marked car has battle damage. The the Ball Valves mounted Division Assistant Li Kunpeng Now detour to the mission area. Following an inspection and found that the "enemy" gunfire blasted in the path crater diameter of over 20 meters, nearly three meters deep, while the steel bridge length is 15 meters, and impossible scaffolding.

 If you recall a car over a single bridge, is bound to be adversely affected by aircraft. Lee Assistant whim, the mechanized bridge car interoperability interaction with the battlefield and mutual aid, and then play the battle  can also take advantage of the features. However, this operation is a selection and training content, usually is just rough practiced, temporary emergency, not sure. Their helpless, it is better to go for it. Lee assistant while groping connected to the input and output of the two vehicles the bottom of the hydraulic tank connector side close battle damage car back to the top of the hydraulic tank ball valve on the tubing, the second car to start hanging pump ... burst rush, a steel bridge erection success.

ball valves manufacturers the end of the recovery disk deduction, battle damage bridge car by mutual rescue once again play a role in causing the officers and men of armored equipment selection and training courses of fierce debate. Some say, I did not expect the selection and training courses critical time actually played a big role; Bridge car, some say, not a blunt instrument, is a coincidence, the equipment and then the war of battle damage, contrary to the rules of the exercise.

Rapidly changing battlefield conditions, Check Valves quipment support should also lea to make use of in situ resources, regardless of the selection and training courses will still training courses to protect the ability to win more than is necessary training can improve. "The face of the controversy, the brigade Security Minister Cheng Jian said with emotion made in recognition of the practice and the Lee Assistant flexibility disposition.

The battlefield situation will not be taken for granted, the support exercise can not move dogma. There is a saying, art does not push the body hates few when goes. Similarly, troops drill without having to adhere to the selection and training will training. The trick pluripotent more practice harm. A Carbon Steel Pipes equipment support exercise flexibility in the use of the practice of emergency in the battle damage equipment crisis, worthy of taste

The Dutch solar lante lights exponential growth peaked in 2020, installation 4GW.

 National Action Plan for Solar Camping Lante installation, public utility companies and the think tank's research shows that the growth is due to the decline in component prices and the liberalization of the Dutch off-grid market.

The potential for long-term installation project installed capacity of 100GW. At present, the the Netherlands installed capacity of approximately 900MW. In 2013, 60% of the Dutch small and medium-sized enterprises are expected to benefit from off-grid solar power subsidies.

 In addition, in 2020, the number of full-time jobs in Dutch solar water heater will be increased to about ten thousand to nearly 40,000 in 2050. The end of 2012, the figures for 1500.

  2012 PV installed capacity in the country is about 4.5GW the solar torch share remained at more than 30%; 2013, large domestic power plant installed at least completed 3.5GW, Golden Sun projects completed at least 2GW distributed contribution considerable capacity increase will also start The amount of total new installed capacity is expected to reach 8-10GW. At the same time, the attitude of the national grid of distributed photovoltaic grid positive forthcoming national electricity subsidies, clearing the way supporting policies, monocrystalline solar panel needs to start facing the bottleneck will soon be resolved. The inverter industry capacity greater flexibility, but after this round of adjustment, the inverter price reversal probability is small, the solar manufacturer industry supply and demand to maintain the balance will be maintained, sun power industry leading position and market share.

Overall the economy dragged down by the solar distributor industry, Sungrow 2012 performance decline. With the substantial growth of the domestic PV installed,the performance of the company will appear in their own capacity to fully release the reversal, we expect 2013-2014 EPS were 0.41 yuan, 0.63 yuan, corresponding to the current stock price PE of 27 times, 17 times, giving "recommended" rating.

The use of different kinds of light bulbs can also reduce energy consumption. Led Downlight Manufacturer saw the market demand. LED market in Japan in 2011, compared to 2010 growth doubled, about two hundred billion yen forecast in 2012 will grow to nearly one hundred billion yen.

 {led par light are more expensive, but the product life cycle than the length of the filament and fluorescent bulbs, it is regarded as energy-saving light bulbs. Not only that, the Japanese market also presents a special case, fans and bamboo curtains 2011 sales growth doubled. As a result of these efforts, the electricity in the summer of 2011 than in Tokyo in the summer of 2010.

 Large tsunami in Fukushima, Japan, in 2011, the Japanese people, with the face of post-disaster reconstruction. 2012 people re-lit lamp, but collective conserve electricity spirit still exists. Many people believe that conserve electricity, and do not mind paying more tariff is clearly willing to pay more tariff stance does not want the money invested to restart a nuclear Led Spotlight|.

the cross-strait Economic Cooperation industrial cooperation working group meeting was held in Taipei. The meeting agreed to set up a procurement mechanism to expand the pilot, Shanxi Province and Harbin City, and for the first time joined the Led Spotlight Manufacturer. Before local govement to handle, plus the two sides have different views on product specifications and standards of procurement, Street Light Manufacturerof products on the mainland, Taiwan factory recommended establishing a procurement mechanism. This meeting, the two sides agreed on the need to plan procurement standard operating processes , but whether to take the restricted tender, which is joint bidding by firms on both sides of joint to be an exchange of views with the industry, and the mainland. The expansion of the pilot, joined the Led Spotlight Outdoor Shanxi Province and Harbin City: Shanxi Bulb mainly focus on the lighting of monuments; Harbin dominated by Led Spotlight, will use more than 5,000 LED lights used for road lighting.